Midea ST 3.6F wi - Wash Cycle Table and Program Start

Wash Cycle Table
3
The table below shows which programs are best for the levels of food residue
on them and how much detergent is needed. It also show various information about
the programs. Consumption values and program duration are only indicative except
for ECO program.
( ) indicates that the program uses rinse aid in the last rinse.
(*EN60436)
230
30
0.613
0.244
6.5
5.8
Pre-wash(50℃)
Wash(70℃)
Rinse
Rinse
Rinse(70℃)
Drying
Pre-wash
Wash(47℃)
Rinse(65℃)
Drying
Wash(40℃)
Rinse
Rinse
90 0.785 6.6
Wash(65℃)
Rinse
Rinse
Rinse(70℃)
Drying
Intensive
Rapid
90 Min
Program
Running
Time(min)
Energy
(kWh)
Water
(L)
Description
Of Cycle
Rinse
Aid
Detergent
Pre/Main Wash
140 0.894 9.6
4/10
1 tab
4/10
1 tab
14
1 tab
12
1 tab
NOTE
(*EN60436)
: The ECO program is suitable to clean normally soiled tableware, that
for this use, it is the most efficient program in terms of its combined
energy and water consumption, and it is used to assess compliance
with the EU ecodesign legislation.
 DE
E

PROGRAM SELECTION