Spray arms
24
It is necessary to clean the spray arm regularly for hard water chemicals will clog the
spray arm jets and bearings.
To clean the spray arm, follow the instructions below:
Spray arms
2
Wash the spray arm in soapy and
warm water and use a soft brush to
clean the jets. Replace them after
rinsing them thoroughly.
1
To remove the spray arm, hold one
end of the spray arm first, then press
down firmly to release the button
and pull it up and out.
NOTE:
Hold one side of both ends of
the spray arm to avoid hitting
the upper bowl basket when
pulling out.
To Next Page
Loading...
