To Next PageTo Next PageWhat to do if wash items are showing signs of rust in my Midea Dishwasher?
If wash items are showing signs of rust after being washed in your Midea Dishwasher, it indicates that these items are unsuitable for dishwasher use. You should discontinue washing such items in the dishwasher.
What to do if water remains in the tub of my Midea Dishwasher?
If water remains in the tub of your Midea Dishwasher, several factors could be at play. Here's what to check: * Inspect the drain hose to ensure it's not kinked or blocked. * Examine the filters in the tub for clogs; carefully remove and clean them, preventing debris from falling into the sump. * Verify that you've selected an appropriate, more intensive wash program. * Ensure no items are obstructing the spray arm's rotation by protruding through the basket or falling through it. * Confirm there's adequate spacing between items to avoid a too-tight loading pattern. * Check that the filters are correctly in place, and inspect the spray arm for blockages if either filter was out of position.
What does the E4 Error Code mean on my Midea Dishwasher?
The E4 Error Code on your Midea Dishwasher indicates that water has leaked from the wash system. This could be due to an item being too tall and stopping the lid from sealing, or it could be due to an internal plumbing or seal failure.
What does the E1 Error Code mean on my Midea 340950?
The E1 Error Code on your Midea Dishwasher indicates a water supply failure, a closed faucet, or insufficient supply water pressure.
What does the E3 Error Code mean on my Midea 340950 Dishwasher?
The E3 Error Code on your Midea Dishwasher indicates that the water temperature is not reaching the target temperature, suggesting a heating element malfunction.
What does the Ed Error Code mean on my Midea Dishwasher?
The Ed Error Code on your Midea Dishwasher indicates a failure of connection between the Display Unit and the Control System, likely due to wiring failure between the two devices.
Why is there insufficient detergent loaded in my Midea Dishwasher?
If there is insufficient detergent loaded in your Midea Dishwasher, increase the detergent quantity.
Why is there foam in the wash tub of my Midea Dishwasher?
Foam in the wash tub of your Midea Dishwasher can occur if you've used non-electric dishwasher detergent. Additionally, spilt rinse aid can cause foaming. If this happens, repeat the rinse program until the foam is clear.
Why are there traces of detergent in the tub of my Midea 340950?
If you notice traces of detergent in the tub of your Midea Dishwasher, try re-running the wash program to ensure the wash load is not contaminated with detergent. Also, make sure you are using the correct type of detergent.
What to do if the spray arm is blocked in my Midea 340950?
If the spray arm in your Midea Dishwasher is blocked, check that all the holes in the spray arm are clear. You can back flush with water to clear any blockages.
General| Brand | Midea |
|---|---|
| Model | 340950 |
| Category | Dishwasher |
| Language | English |
General safety guidelines and intended use of the appliance.
Guidance on responsible disposal of the appliance and packaging.
Visual identification of the dishwasher's main components and features.
Explanation of buttons, indicators, and display elements on the control panel.
Advice on how to load the dishwasher baskets for optimal results.
Guidelines on what items are suitable and how to load them correctly.
Instructions for filling the detergent dispenser and rinse aid compartment.
Details on available wash programs, temperatures, and consumption.
Step-by-step guide to choosing a drawer and initiating a wash cycle.
How to change programs or add items during an ongoing wash cycle.
Procedures for cleaning the exterior and interior of the dishwasher.
Instructions for cleaning the dishwasher's filtering system and spray arms.
Advice on frost precautions, general cleaning, and long-term storage.
Required measurements and preparation steps for the installation space.
Methods for attaching mounting brackets and securing the appliance.
Power supply specifications and safety precautions for installation.
Procedures for connecting cold water inlet and drain hoses.
A checklist of common problems and their probable causes and solutions.
Explanation of error codes displayed by the dishwasher for malfunctions.
