Midea WQP6-3607 User Manual

Midea WQP6-3607

46 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

PART Ⅰ: Generic Version

WQP6-3607

Please read this manual carefully

before using the dishwasher and

Keep this manual for future reference.

Other manuals for Midea WQP6-3607

Questions and Answers:

J
Jose GarciaAug 19, 2025
Why is my Midea Dishwasher leaking water?
- V
  Veronica BenjaminAug 19, 2025
  If your Midea Dishwasher is leaking water, there are several potential causes. The dishwasher might have too much water fill. The drain pump could be defective and need replacement. The dishwasher might not be level, so ensure it is properly leveled. Check for loose hose clamps and tighten or replace them as needed. Also, inspect the overflow cover to ensure it is securely mounted. Verify that the drain pump assembly is properly seated with the sump, and replace the flow system seals if they are defective.
B
Blake CaseyAug 21, 2025
What to do if my Midea WQP6-3607 will not pump out water?
- T
  tyler54Aug 21, 2025
  If your Midea Dishwasher won't pump out water, several issues could be the cause. It might be due to a defective drain pump, which would require replacement. Another potential cause is an obstructed drain hose, so check the drain hose for any blockages. Additionally, damaged or defective wiring could be the culprit, necessitating wiring repairs. Lastly, a defective PCB assembly might be the reason, in which case, the PCB assembly would need to be replaced.
B
Bryan JonesAug 25, 2025
How to fix a Midea WQP6-3607 Dishwasher that does not work when I press start?
- G
  Gerald ChavezAug 25, 2025
  If your Midea Dishwasher isn't starting when you press the start button, it could be due to a few reasons. First, make sure the door is completely closed. If it is, the door switch contacts or the door handle assembly might be defective and need replacement. Damaged or defective wiring or a defective PCB assembly could also be the cause, requiring repair or replacement, respectively.
C
Catherine RamirezAug 26, 2025
Why is there standing water in my Midea WQP6-3607 Dishwasher?
- R
  Rachael MorrisAug 26, 2025
  If water remains in the bottom of your Midea Dishwasher, it could be due to a defective drain pump, which would need to be replaced. Another potential cause is a defective check plate or one way valve, which may need to be cleaned or replaced.
J
Justin ArcherAug 27, 2025
Why is my Midea Dishwasher showing error E1 and not filling with water?
- W
  wsparksAug 28, 2025
  If your Midea Dishwasher displays error code E1, it means the dishwasher is not filling with water properly. This could be due to several reasons: * The water supply might be turned off; turn it on. * There might be low water pressure; ensure a minimum of 20 PSI. * The water fill valve could be defective and needs replacement. * There might be an obstruction in the water fill valve or hose; disassemble and clean them. * There may be heavy water usage elsewhere in your home; try using the dishwasher when water usage is minimal. Other potential causes include damaged wiring (repair the wiring), a defective pressure switch (replace the pressure switch), a defective flowmeter (replace the flowmeter), or a defective PCB assembly (replace the PCB assembly).
N
Natalie NicholsAug 29, 2025
Why does my Midea WQP6-3607 Dishwasher run but not heat the water?
- V
  vhoodAug 29, 2025
  If your Midea Dishwasher runs but doesn't heat, it could be due to several reasons. The input voltage may be too low; the lowest input voltage should be 198V. The thermal resistor or heating element might be defective, requiring replacement. Damaged or defective wiring could also be the cause, necessitating repair. Other potential issues include too little water fill (refer to the troubleshooting for 'Too little water fill'), a defective micro-switch of the pressure switch assembly (replace the micro-switch), or a defective PCB assembly (replace the PCB assembly).
R
Rachel HicksAug 31, 2025
What does error E4 mean on my Midea WQP6-3607?
- J
  Janet HatfieldAug 31, 2025
  If your Midea Dishwasher is showing an E4 error, it indicates an overfill alarm. This could be due to a defective micro-switch for overfall safeguard, which would need to be replaced. Alternatively, it could be caused by damaged or defective wiring, requiring repair. In some cases, a defective PCB assembly may also trigger this error, necessitating its replacement.
C
Catherine ReevesSep 2, 2025
Why is my Midea WQP6-3607 Dishwasher not filling with enough water?
- A
  Andrea PalmerSep 2, 2025
  If your Midea Dishwasher has too little water fill, several factors could be responsible. Ensure the dishwasher is level. A defective flowmeter could also be the cause and would need replacement. Check the filter assembly for clogs and clean it if necessary. Additionally, water may be siphoning out, in which case you should clean or replace the air breaker.
J
John GrantSep 4, 2025
Why does my Midea WQP6-3607 keep running when the door is open?
- M
  Ms. Michelle JacobsSep 4, 2025
  If your Midea Dishwasher continues to run even when the door is open, the issue likely lies within the door's safety mechanisms. The door switch contacts or the door lock assembly may be defective, requiring replacement. Damaged or defective wiring could also be the cause, necessitating repair. In some cases, a defective PCB assembly might be responsible, requiring its replacement.
C
Christopher JohnsonSep 6, 2025
Why does my Midea WQP6-3607 motor hum but not start?
- T
  Tammy McmahonSep 6, 2025
  If the motor in your Midea Dishwasher hums but doesn't start or run, it could be due to several reasons. The motor bearings might be defective, requiring replacement of the motor. Alternatively, the motor capacitor could be defective and need replacement. Damaged or defective wiring could also be the cause, necessitating repair. Finally, improper motor voltage could be the issue, in which case the motor should be replaced.

Midea WQP6-3607 Specifications

General

Brand	Midea
Model	WQP6-3607
Category	Dishwasher
Language	English

Summary

Safety Information

Earthing Instructions

Instructions for proper grounding of the appliance to prevent electrical shock.

Product Overview

Using Your Dishwasher

Loading Salt into Softener

Guide to filling the dishwasher salt reservoir for optimal performance.

Maintenance and Cleaning

External Care

Cleaning the dishwasher's exterior surfaces and control panel.

Internal Care

Instructions for cleaning the filtering system and spray arms.

Dishwasher Care and Frost Prevention

Measures for protecting the dishwasher during winter and after each wash.

Installation Instruction

Power Connection

Guidelines for safe and correct electrical connection of the dishwasher.

Water Supply and Drain Connection

Instructions for connecting the cold water supply and drain hoses.

Drain Hose Connection

Detailed steps for connecting the dishwasher's drain hose.

Appliance Positioning

Guidance on placing the dishwasher in its intended location.

Built-In Installation Guide

Steps for integrating the dishwasher into kitchen cabinetry.

Troubleshooting Tips

Loading the Baskets According to EN50242

Main Basket Loading Guide

Instructions for loading dishes in the main basket according to EN50242 standard.

Cutlery Basket Loading Guide

Instructions for loading cutlery in the basket according to EN50242 standard.

Using Your Dishwasher

Control Panel and Operation

Explains the dishwasher's control panel, buttons, and display indicators for operation.

Water Softener Settings

How to set the water softener and adjust salt consumption based on water hardness.

Preparing and Loading Dishes

Guidance on preparing dishes and what items are suitable or not for washing.

Rinse Aid and Detergent Function

Explains the role of rinse aid and detergent and how to use them.

Filling Rinse Aid Reservoir

Step-by-step guide on how to refill the rinse aid dispenser.

Filling Detergent Dispenser

Instructions for adding detergent to the main and pre-wash compartments.

Programming the Dishwasher

Wash Cycle Table

Details of available programs, including running time, energy, water consumption, and rinse aid.

Starting a Wash Cycle

Steps to select a program, load dishes, and start the dishwasher.

Changing Program Mid-cycle

Procedure for modifying a wash cycle while it is already running.

Adding a Dish Mid-cycle

Instructions on how to add a forgotten dish during a wash cycle.

Error Codes

Technical Information

Related product manuals

Preview: Midea WQP6-3602F

Midea WQP6-3602F

Preview: Midea WQP6-3603A

Midea WQP6-3603A

Preview: Midea WQP6-3602E Series

Midea WQP6-3602E Series

Midea WQP6-3209

Preview: Midea WQP6-3206B

Midea WQP6-3206B

Preview: Midea WQP6-3207A

Midea WQP6-3207A

Preview: Midea WQP6-3208-US

Midea WQP6-3208-US

Midea WQP6-3705-AU

Midea WQP6-3305E series

Preview: Midea WQP4-2605

Midea WQP4-2605