28
Inlet Pipe Connected
Connect the cold water supply hose to a threaded
3/4(inch) connector and make sure that it is fastened
tightly in place.If the water pipes are new or have not
been used for an extended period of time, let the
water run to make sure that the water is clear and free
of impurities. If this precaution is not taken, there is a
risk that the water inlet can get blocked and damage
the appliance.
Please Note: If the supplied hose cloes not fit your tap, please contact your local
plumbing supply center where adapters are available for purchase.
Connect the inlet pipe to the faucet
Connect the inlet pipe to the dishwasher
To Next Page
Loading...
