24
Take o the 4 screws as indicated in Picture 1.
Take o the shell as Picture 1.
Take o the two srews on the proportional valve and gas distributor as indicated in
Picture 2.
Take o the four screws on the burner and gas distributor as indicated in Picture 2.
Take o the gas distributor as Picture 2.
Dismantle the two screws on the gas distributor and air distributor as in Picture 2.
Replace the gas distributor as in Picture 2.
Replace the air distributor as in Picture 2.
Install the air distributor as in Picture 2.
Install the upper part of the gas distributor. Picture 3.
Fix the flue pipe with chimney, and then adjust the parameters. Picture 3.
Put on the shell. Picture 4.
FA /5E parameter adjustment. Picture 5.
●
●
●
●
●
●
●
●
●
●
●
●
●
Installation/Assembly
MGWH13-26EGPGR(W)
To Next Page
Loading...
