MIDIPLUS Co, Ltd.
2.4 Octave buttons (DOWN& UP)
Octave buttons(DOWN& UP)，can be used to enlarge the 0-key to 88-key or more.
Every time to reduce or increase an octave (the default value of 4)
1. To reduce an octave (octave value less than 4)”OCTAVE UP” LED lights;
2. To increase an octave (octave is greater than 4)”OCTAVE DOWN”LED lights;
3. Octaves Value is 4, ”OCTAVE UP” LED and ”OCTAVE DOWN”LED will put out.
At the same time press ”OCTAVE DOWN” & “OCTAVE UP” buttons，the
octaves value return to the default value(4).
4. Colors: Octave up LED: Green-octave 0 , Red - 1 , Sky blue – 2 , Yellow – 3
Octave down LED: Yellow – 5 , Sky blue – 6 , Red – 7 , Green - 8
2.5 SETUP
Composite keyboard mode switch, When press “SETUP” button, not loosen，LED
light Yellow, the composite keyboard mode is ON, then press any keyboards and will
make can reuse functions. For example: “SETUP” is ON, press the keys of the first
(Transpose +), can Transpose +1. Loosen the “SETUP” button will exit composite
keyboard mode.
2.6 Volume clipper potentiometer
The potentiometer can adjust the MIDI volume, adjust the volume potentiometer will
transmit the MIDI messages.
2.7 Pitch wheel
Pitch wheel: Transmits MIDI Pitch Bend information to raise or lower the pitch of a
note temporarily.
2.8 Modulation wheel
Modulation wheel: This wheel can be used to transmit continuous controller data
(CC #1 or Modulation Depth).
2.9 Transpose+/-
It is possible to transpose up or down by as much as 12 MIDI notes, ”SETUP” LED
flash Yellow once
2.10 REVERB ON/OFF:
It is open and closed reverberation function, ”SETUP” LED flash Green once when
Reverb OFF, flash Red once when Reverb ON.
2.11 VELOCITY Curve (NORM/HEAVY/SOFT/VEL):
Choose velocity curve (standard/heavy/light/vel), the user can choose according to
personal feel the velocity of the corresponding curve, ”SETUP” LED flash Yellow once.
Ps. VEL is no change in velocity, all are max velocity 127
To Next Page
Loading...
