Midland BENCHMARK HH0407 - Adjust Wheel Links

23
7.3 ADJUSTING THE WHEEL LINKS
There are 3 grooves in the connector plate. Position the wheels in the highest groove
(Slot 3) when operating the tiller. Position the wheels in Slots 1 or 2 when the tiller is
not in operation.
1. Pull hard on the wheel assembly to release the spring lock.
2. Slide the wheel to the desired position and release to lock in place.
1 2 3
Spring
Lock
1 2 3
Spring
Lock
1 2 3
Spring
Lock
HH0407