Midland BENCHMARK HH0408

Questions and Answers:

S
spencerryanAug 11, 2025
Why is my Midland BENCHMARK HH0408 Tiller engine difficult to start?
- T
  Taylor WilliamsAug 11, 2025
  If your Midland Tiller engine is difficult to start, first, ensure you have fresh fuel. If that's not the issue, check that the engine switch is turned ON. Also, the engine may not be primed, so press the primer bulb 3 times. Other potential causes include a disconnected spark plug wire (attach it to the spark plug), a fouled spark plug (inspect and replace if needed), a dirty carburetor (take it to a service center), a clogged air filter (remove and clean it), or contaminated fuel (drain, clean, and refill the fuel tank).
T
Tamara CaseyAug 17, 2025
What to do if my Midland BENCHMARK HH0408 Tiller engine runs rough?
- M
  Miguel JensenAug 17, 2025
  If your Midland Tiller's engine smokes excessively, runs rough or erratically, or can't maintain full speed, first check the engine oil level and add or drain oil as needed. Also, inspect the spark plug and replace it if it's fouled. Clean the air filter if it's clogged. If the fuel is contaminated, drain and clean the fuel tank before refilling it with fresh fuel. If these steps don't resolve the issue, the carburetor may need adjustment by an authorized service center.
L
lisapowellAug 25, 2025
How to fix Midland Tiller tines that will not rotate?
- S
  Sheila BentonAug 25, 2025
  If the tines on your Midland Tiller will not rotate, first check for any debris interfering with the tines and remove it. If no debris is present, inspect the tines for looseness and replace the tine bolts and nuts if necessary. Finally, check the drive belts and replace them if they are damaged.
D
Dana HammondAug 29, 2025
What to do if Midland BENCHMARK HH0408 tines continue to rotate when drive lever is not engaged?
- C
  Christina OrtizAug 29, 2025
  If the tines on your Midland Tiller continue to rotate when the drive lever is not engaged, the drive belts are likely damaged and need to be replaced.
J
Jeffrey DavisSep 4, 2025
What to do if my Midland BENCHMARK HH0408 engine will not stop?
- M
  Michael WashingtonSep 4, 2025
  To stop your Midland Tiller engine, replace the switch.