26
7.2 ADJUSTING THE WHEEL LINKS
The ideal height of the handlebar varies with operator height and the depth of tilling.
Use the upper hole in the adjustable wheel links for shallow to medium tilling depths.
Use the lower hole in the adjustable wheel links for deep tilling.
1. Remove the cotter pin and clevis pin.
2. Align lower handle to desired hole on the wheel link.
3. Reinstall the cotter pin and clevis pin.
7.3 ENGAGING THE TINES AND WHEELS
Engage the tines by bringing the clutch lever to the handle.
Upper
Hole
Lower
Hole
To Next Page
Loading...