EasyManua.ls Logo

Midland BENCHMARK HH0408 - Changing the Oil

Midland BENCHMARK HH0408
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
9.2 CHANGING THE OIL
WARNING!
Used motor oil can cause skin irritations if left in long-term
contact with skin. Thoroughly wash off used oil as soon as
possible with soap and water.
Do not dispose of used oil in drains or on soil. Local service
shops provide environmentally-friendly disposal methods.
Drain the oil rapidly and completely while the engine is still warm.
1. Remove the oil drain bolt and tilt the tiller slightly to drain the oil into an
appropriate container.
2. After the oil has drained, reinstall and tighten the oil drain bolt.
3. Clean any moisture or debris from the oil ll area.
4. Remove oil dipstick and wipe with a clean cloth, set aside.
5. Pour engine oil slowly into the engine oil ll tube. Do not overll.
Max Oil Level
Min Oil Level
Oil Capacity
17 . Oz / 500mL
0°C
10 20 30 40 50-10-20-30
20
32°F
40 60 80 100 120
°C
°F0-20
15W-50
10W-30
Synthetic 5W-30
5W-30
Effective Viscosity Range of Engine Oils
Oil Cap &
Dipstick
Fill until 1 inch
below the top of the neck
Fuel Cap
OPEN
Fuel Capacity: 0.3 Gal / 1.2 L
Oil Drain Bolt

Table of Contents

Related product manuals