EasyManua.ls Logo

Midland BENCHMARK HH0408 - Page 37

Midland BENCHMARK HH0408
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
33
6. Wait one minute, then insert and tighten the dipstick. Remove again to
check the oil level, it should be at the top of the full indicator.
7. When the oil level is at the top of the full indicator, reinstall and tighten the
dipstick securely.
NOTE
Max oil capacity: 17 . oz / 500mL
SAE 10W-30 is recommended for general use.
DO NOT OVERFILL.
Do not tilt when adding engine oil. This could result in overlling and
damage to the engine.
Use high quality 4-stroke engine oil, certied to meet or exceed
API standard SG, SF, SAE ratings with strong detergents. Using
nondetergent or 2-stroke oil could shorten the engine’s working life.
Do not mix different engine oils.
Handle and store the engine oil with care, avoid getting dirt or dust into
the engine oil.
To avoid damaging the engine, check the oil level as often as possible.
Max Oil Level
Min Oil Level
Oil Capacity
17 . Oz / 500mL
0°C
10 20 30 40 50-10-20-30
20
32°F
40 60 80 100 120
°C
°F0-20
15W-50
10W-30
Synthetic 5W-30
5W-30
Effective Viscosity Range of Engine Oils
Oil Cap &
Dipstick
HH0408

Table of Contents

Related product manuals