EasyManua.ls Logo

Midland BENCHMARK HH0408 - Pre-Operation Check

Midland BENCHMARK HH0408
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
4. PRE-OPERATION CHECK
WARNING!
Exhaust gas contains poisonous carbon monoxide. NEVER run
the tiller in an enclosed area. Be sure to provide adequate
ventilation. Operate the tiller on a level surface. If the tiller is
tilted, fuel spillage may result. Keep away from rotating parts
while the tiller is running. The tiller is air-cooled and may be
damaged if ventilation is inadequate.
These quick checks should be done each time the tiller is started to ensure you get
the most out of your tiller.
Set the tiller on a level surface and the power to OFF.
4.1 CHECK OIL LEVEL
1. Place the tiller on a level surface and ensure the depth regulator is set so
that the main frame of the tiller is level.
Max Oil Level
Min Oil Level
Oil Capacity
17 . Oz / 500mL
0°C
10 20 30 40 50-10-20-30
20
32°F
40 60 80 100 120
°C
°F0-20
15W-50
10W-30
Synthetic 5W-30
5W-30
Effective Viscosity Range of Engine Oils
Oil Cap &
Dipstick

Table of Contents

Related product manuals