Midland BENCHMARK HH0407 - Page 41

37
Tines will not rotate.  Debris interfering
with the tines.
 Tines are loose.
 Damaged drive belts.
 Remove debris from
around tines.
 Replace tine bolts and
nuts.
 Replace drive belts.
Engine will not stop.  Check the switch.  Replace the switch.
Tines will not cut
properly.
 Damaged or worn
tines.
 The tines assembled
incorrectly.
 Replace drive belts.
 Refer to “Adjusting the
Tilling Width” Section.
Frequent engine
stalling.
 Excessive tilling
speed / depth.
 Engine problems
(above).
 Till at a moderate pace.
Make multiple passes.
 Refer to engine solutions
(above).
HH0407