43
Tines will not rotate. Debris interfering
with the tines.
Tines are loose.
Damaged drive belts.
Remove debris from
around tines.
Replace tine bolts and
nuts.
Replace drive belts.
Tines continue to
rotate when drive
lever is not engaged.
Damaged drive belts. Replace drive belts.
Engine will not stop.
Check the switch. Replace the switch.
Tines will not cut
properly.
Damaged or worn
tines.
The tines assembled
incorrectly.
Replace drive belts.
Refer to “Assembling the
Tines” Section.
Frequent engine
stalling.
Excessive tilling
speed / depth.
Engine problems
(above).
Till at a moderate pace.
Make multiple passes.
Refer to engine solutions
(above).
HH0408
To Next Page
Loading...