Midland CT 710 - Menu Function introduction and setting; Reset

CT710 Instruction Guide | 25
time. The display will show “RESET?”.
Press the ENTER key, the LCD will show “VFO?”.
Press ENTER to confirm and all the settings of frequency mode will be
deleted.
Delete all contents of frequency mode and channel mode (Reset FULL)
Turn on the radio while keeping pressed the MENU key at the same
time. The display will show “RESET?”.
Press the ENTER key, the LCD will show “VFO?”.
Rotate the encoder and choose “FULL?”, then press ENTER as confir-
mation. All settings of channel and frequency mode will be deleted.