26 | CT310 Instruction Manual
Display Mode Setup
There are three kinds of display modes for optional.
1. Press PF2 key to turn on radio, hold PF2 key until transceiver emits beep.
2. Press MAIN or V/M key to choose No. 01 function item, it shows “DSP”
on LCD.
3. Rotate channel switch to choose desired setup.
FREQ: Frequency + Channel mode, transceiver displays current channel
name + frequency, press V/M key to switch into VFO mode.
CH: Channel mode, 1 ~ 21 items of function menu will hide automatically,
user can only operate some functions. It is unable to switch into VFO by
pressing V/M key. This model can be used for Amateur mode.
NAME: Channel + Name Tag mode, transceiver displays current channel
number+ channel name, press V/M key to switch into VFO mode.
4. Press ESC key or #/ENT key to confirm and exit.
Resume Factory Default
You can make all the settings of transceiver return to the factory default
settings when transceiver can not work normally because of wrong operation
or error setup.
1. Press PF2 key to turn on radio, hold PF2 key until transceiver emits beep.
2. Press MAIN or V/M to choose No. 02 function item, it shows “RESTOR”
on LCD.
3. Rotate channel switch to choose desired setup.
OFF: No operations.
FACT: Resume all items to factory default, including channel and
background settings.
INIT: Resume background settings to factory default, channel operations
are keeping.
4. Press ESC key to exit current selection.
5. Press #/ENT key to confirm current selection.
Note: In power o state, hold ESC key to power on radio, the radio will resume
to factory default.
To Next Page
Loading...
Need help?
General
