Why is my Midland FG-2 range so short?
The range of your Midland Two-Way Radio might be limited if you're operating it inside a vehicle or metal building; try using it outside. Holding the radio close to your body can also reduce the range, so hold it in the open. Also, check your battery condition, and replace or recharge the batteries if needed.
Why is the battery icon flashing on my Midland FG-2 Two-Way Radio?
If the battery icon is flashing on your Midland Two-Way Radio, replace the alkaline batteries or recharge the rechargeable batteries.
What to do if my Midland FG-2 cannot receive messages?
If your Midland Two-Way Radio isn't receiving messages, first ensure the volume is high enough. You might also be out of range, so try changing your location. Check if the CTCSS code is enabled and ensure all parties are using the same code. Finally, make sure the batteries are correctly installed or replace them.
How to fix Midland FG-2 with no power?
If your Midland Two-Way Radio has no power, check the battery installation and replace the batteries if necessary.
Why does my Midland Two-Way Radio squeal when receiving messages?
If your Midland Two-Way Radio squeals when receiving messages, the batteries may be weak. Check the battery condition. Lowering the volume usually stops the squealing.
Why can't I change channels on my Midland FG-2 Two-Way Radio?
If you cannot change channels on your Midland Two-Way Radio, ensure that the keyboard is not locked and that the radio is not transmitting.
Why is the display dim on my Midland Two-Way Radio?
If the display on your Midland Two-Way Radio is dim, try repositioning or replacing the batteries.
General| Brand | Midland |
|---|---|
| Model | FG-2 |
| Category | Two-Way Radio |
| Language | English |
Instructions on how to turn the radio unit on and off using the volume control.
Guide on how to select and switch between different radio channels.
How to use Busy Channel Scan to stop on active channels.
Instructions for scanning two channels simultaneously for communication.
Guide to operating the radio hands-free using voice activation.
Adjusting sensitivity and delay for the voice-activated transmit feature.
Steps to activate or deactivate the VOX mode for hands-free operation.
To Next Page