11
ACTIVATING “PRIVACY” CODES
To activate “CTCSS” codes
!
Activating the “CTCSS”
code will prevent you from hearing any conversation
that is not using the same “CTCSS” code. This does not make your
conversation private. See the “Note about the CTCSS Codes” previously in
this manual.
1. Press the
“F”
button twice to cause the icon
“CTCSS”
to be displayed in the
upper left of the display to flash.
2. Press and release the
“UP”
or
“DOWN”
buttons to select the “CTCSS” code you
desire.
3. Press “
ENTER”
to store the code setting for that channel.
!
A code of “
oF
” means no code is programmed.
!
You must do this for each of the channels you want CTCSS codes on.
!
Activating the “CTCSS
”
code will prevent you from hearing any conversation
that is not using the same “CTCSS
”
code. This does not make your
conversation private.
!
It is recommended if wish to set another channel for CTCSS code, choose a
different code than the ones in use.
The following is a list of frequencies of the CTCSS codes. Different brands of radios
may use a different number for the frequencies. For operation with other brands of
radios the selected CTCSS frequency must match.
01=67.0 Hz 11=97.4 Hz 21=136.5 Hz 31=192.8 Hz
02=71.9 Hz 12=100.0 Hz 22=141.3 Hz 32=203.5 Hz
03=74.4 Hz 13=103.5 Hz 23=146.2 Hz 33=210.7 Hz
04=77.0 Hz 14=107.2 Hz 24=151.4 Hz 34=218.1 Hz
05=79.7 Hz 15=110.9 Hz 25=156.7 Hz 35=225.7 Hz
06=82.5 Hz 16=114.8 Hz 26=162.2 Hz 36=233.6 Hz
07=85.4 Hz 17=118.8 Hz 27=167.9 Hz 37=241.8 Hz
08=88.5 Hz 18=123.0 Hz 28=173.8 Hz 38=250.3 Hz
09=91.5 Hz 19=127.3 Hz 29=179.9 Hz oF =OFF
10=94.8 Hz 20=131.8 Hz 30=186.2 Hz
RESETTING THE RADIO
If the radio stops responding to button presses or otherwise does not function properly
in some cases the radio can be reset to restore normal operation.
To reset the radio: With the radio off, press and hold the
“F”
button and turn the radio
on. Release the
“F”
button when the radio powers up. (see turning the radio on)
To Next Page
Loading...
