11
Important Requirements When Using Repeater Channels
• Speech transmissions are not allowed on channel 22 and 23 (RX Only)
• CTCSS and Call ring tone calling should be disabled on channel 5 & 35
• If Call ring tone calling is provided, it can only operate for a
maximum of 3 seconds once in any 60 second period.
10. TECHNICAL SPECIFICATIONS
GENERAL
Compliant Specicaon AS/NZS 4365
Frequency Range 476.425-477.4125 MHz
Number of Channels 80 UHF CB
Channel Spacing 12.5 kHZ
Operaon Mode Simplex channels 1-8
Semi Duplex Channels 1-8, 41-48
Power Supply 6+/-10% V DC
Duty Cycle TX 5%, RX 5%, stand-by 90%
RF Output 3.0 was max
TRANSMITTER
Modulaon FM
RECEIVER
Sensivity 0,35uV
Adjacent channel rejecon 70dB
Audio output power 300mW @ 10% THD
Intemediate Frequencies 1
st - 21.4 MHz 2nd - 450 kHZ
MECHANICAL
Dimensions (without baery) 58 (L) x 122 (H) x 34 (D) mm
Weight (without baery) 123 grams
Jack for ext. mike and recharge stereo 2.5mm
Jack for ext. speaker mono 3.5mm
ENVIRONMENTAL
Temperature Range -10°C to + 60°C
Original accessories
For a detailed and updated list of suitable accessories, please go to:
www.audioxtra.com.au or www.midlandradio.eu
Disposal of all arcles displaying this symbol on the body, packaging or
instrucon manual should be in a recycle bin or at a specialised waste disposal
centre. This will contribute to environmental protecon.
To Next Page
Loading...
