Midland G7XT User Manual

9
CH selected Received CH Transmit CH CH selected Received CH Transmit CH
1
1 31
41
41 71
2
2 32
42
42 72
3
3 33
43
43 73
4
4 34
44
44 74
5
*
5* 35*
45
45 75
6
6 36
46
46 76
7
7 37
47
47 77
8
8 38
48
48 78
* Emergency channel only
6.3 Choosing high or low transmission power
Baeries are drained more quickly during transmission. In order to extend baery life,
select low power when transming over short distances.
1. Press the MENU [18] buon 3 mes and Pr will be displayed.
2. Select L [7] using the scroll buons
[20].
3. Press PTT [12] to conrm, or wait for 5 seconds.
To transmit over a longer distance, repeat the above procedure to select high power.
At step 2 select H [7]. When the baeries are in good condions, high power is 3W,
whereas low power is 1W.
Note: Low baery levels during transmission will reduce the radio’s performance.
6.4 VOX funcon
Midland G7
XT enables hands free conversaons through VOX funcon. The sensivity
of VOX can be adjusted in 2 dierent levels. VOX funcon can be enabled with or
without accesories. To acvate VOX funcon press the MENU [18] buon 4 mes and
VOX [1] will appear on the display. Use the scroll [20] buons to select:
• OFF: Disabled
• 2: 1st Level (Low sensivity)
• 2: 2nd Level (High sensivity)
Press PTT [12] to conrm or wait 5 seconds.
To disable the VOX funcon follow the
instrucons above and select opon oF.
6.5 Vibra-Call funcon
Midland G7XT is equipped with the “Vibra-Call” feature, which provides a silent alert
for incoming calls. It will vibrate when calls are received.
To acvate it, follow these steps:
1. Press the MENU [18] buon 5 mes, unl the display shows
[6];
2. Use the
[20] buons to disable or enable this feature (ON: enables, OF
disables.
3. Push PTT [12] to conrm or wait for 5 seconds.
Note: When Vibracall funcon is enabled, call tone will not be heard.
6.6 ROGER BEEP (End Transmit Tone)
Every me you end a transmission (PTT [12] released), sound indicates to the other
party that s/he can start talking. This funcon is factory disabled. To acvate it:
1. Press the MENU [18] buon six mes unl the display shows “ rb oF”
2. Using the scroll buons
[20] select “on” and “rb oF”;
3. To conrm the roger beep acvaon, press PTT [12] or wait for 5 seconds.
6.7 CALL Funcon
Midland G7XT can send 5 dierent call tones. Press the CALL/ [13] key.

Midland G7XT Specifications

General

Brand	Midland
Model	G7XT
Category	Radio
Language	English