Page 10 www.midlandradio.com
KEYPAD LOCK
To avoid accidentally changing the radio setting, press the LOCK
button for 4 seconds. The KEY LOCK icon will appear on the display.
PTT and CALL will still be active. Repeat the same procedure to
unlock the keypad.
DISPLAY ILLUMINATION
During Power on, the display illumination will activate for approx. 7
seconds. The display illumination can also be activated when the
MENU button is pressed.
CHANNEL SELECTION (GMRS/FRS BAND)
Press the MENU button once, and then the buttons to select one
of the 22 GMRS/FRS channels. To confirm the selection, press the
PTT button or press the MENU button again to move to the next
feature setting.
SETTING PRIVACY CODES
Your GXT600/650 Series has 121 Privacy Codes available. The
selected Privacy Code may be different for each channel. To select a
Privacy Code for the current channel press the MENU button twice,
and then the buttons to select between “Off/CTCSS/DCS”.
Press again the MENU button and the button to select one of
the 38 CTCSS Codes or one of the 83 DCS Codes. The Privacy
Code icon on the display will indicate whether you set your Privacy
Code in CTCSS or DCS mode. To confirm the selection, press the
PTT button or press MENU button again to move to the next feature
setting.
Note : Selecting a Privacy Code of "oF" will disable the Privacy
feature. To communicate between two GXT600/650 Series
radios, all radios in your group must be set to the same channel
and Privacy Code selections.
To Next Page
Loading...
Need help?
General
