To Next Page

To Previous Page

M Zero Plus Instruction Guide | 5

INSTALLATION

Safety and convenience are the primary consideration for mounting any piece of

mobile equipment. All controls must be readily available to the operator without

interfering with the movements necessary for safe operation of the vehicle. Be sure

all cables are clear of the brake, clutch and accelerator. Also, thought must be given

to the convenience and comfort of passengers.

Another extremely important requirement is the ease of installation and removal

for those occasions when you might want to remove the unit for service and main-

tenance.

The most common mounting position for a transceiver is under the dashboard di-

rectly over the drive shaft hump. Do not mount the transceiver in the path of the

heater or air conditioning air stream. Take your time and plan your installation care-

fully. When you have determined the best location for mounting, use the mounting

bracket as a template to mark mounting holes. Take care when you drill the holes

that you do not drill into wiring, trim or other accessories.

Washers

Screws

Bracket

Nuts

Screws and

washers

Midland M Zero Plus User Manual

Questions and Answers: