Midland M Zero Plus - Technical Specifications; Receiver Specifications; Transmitter Specifications

12 | M Zero Plus Instruction Guide
TECHNICAL SPECIFICATIONS
RECEIVER
Frequency coverage ............................................... 26.965 to 27.405 MHz (Europe)
..................................................................................26.960 to 27.400 MHz (Poland)
Sensitivity .........................................................better than 1.0 µV for 20 dB SINAD
Adjacent Channel Rejection ............................. 60 dB at 10 kHz; 70 dB for 20 KHz
Intermediate Frequency ................................. 1st IF=10.695 MHz; 2nd IF=455 KHz
Audio Output power ....................................................................................2 watts max
Frequency Response (6dB) ................................................................... 450-2500 Hz
Cross Modulation .................................................................................. 45 dB or better
Squelch ...........................................................................adjustable from 1.2 µV to 1mV
Duty cycle ............................................................................................................5/5/90
TRANSMITTER
Frequency coverage ............................................... 26.965 to 27.405 MHz (Europe)
..................................................................................26.960 to 27.400 MHz (Poland)
Output Power ........................................................................................................... 4 W
Type of modulation.............................................................................................AM/FM
Max modulation ........................................................................................................ 90%
Max deviation.......................................................................................................1.9 KHz
Spurious Radiation ................................................................................62 dB or better
Frequency Tolerance .....................................................................better than 0.002%
Antenna impedance ..........................................................................................50 Ohm
Power supply .......................................................................................12,6 V ± 10%max
Max Current Drain..................................................................................................... 2A
Dimensions ..........................................................................................110x45x140 mm
Weight .....................................................................................................................665 g
Specifications are subject to change without notice.
A readily accessible disconnect device shall be incorporated in the installation wiring.
The disconnect device shall disconnect both poles simultaneously.