Midland MicroMobile MXT575 - Powering On;Off and Volume Adjustment; Selecting Active Channels

Page 14
midlandusa.com
Model MXT575
POWER ON/OFF
1.To power on, press and hold the POWER button for two seconds. You
will hear a tone when the radio is on.
• The LCD display will show all icons for one second and then display
the most recently selected channel.
2. To power off, press and hold the POWER button for two seconds.
The LCD will go blank when the radio turns off.
SELECTING THE ACTIVE CHANNEL
IMPORTANT! To communicate between two MXT575 radios or any GMRS
radio, both radios must be set to the same channel and privacy code
(see Selecting a Privacy Code) selections.
1. Press the CHANNEL UP button on the microphone to scroll forward
through the available channels. Press the CHANNEL DOWN button on the
microphone to scroll backwards through the available channels.
• The channel icon on the LCD will display the active channel selection.
• To make the repeater channels selectable, see Activate Repeater
Channels.
ADJUSTING THE VOLUME
1. Press and release the Volume Up button to increase the volume
2. Press and release the Volume Down button to decrease the volume