Midland MicroMobile MXT575 - Scanning for Active Channels

Page 17
midlandusa.com
Model MXT575
SCANNING FOR ACTIVE CHANNELS
Your MXT575 includes an “auto-scan” mode that continuously scans all 15
GMRS channels for activity.
1.Press the SCAN button to enter “auto-scan” mode.
• Your radio will rapidly scan through the 15 GMRS channels and will
pause on any active channel.
• “Auto-scan” will resume when there has been no activity on the
current channel for ve seconds.
2.To transmit during “auto-scan”, press and hold the PTT button on the
microphone while the radio is paused on the desired channel.
• The radio will remain on the active channel for ve seconds after the
PTT button is released.
3.To exit “auto-scan” mode, press the SCAN button.
• The scanning icon will turn off when the radio is on longer in
“auto-scan” mode.
NOTE: If you transmit during “auto-scan” and the “auto-scan” has not
found and active channel, it will transmit on the last selected
channel.