Page 19
midlandusa.com
Model MXT275
MENU MODE FUNCTIONS
The “Menu” mode provides access to the features and functions shown in
the chart below. For additional utility functions, see UTILITY FUNCTIONS.
Pt - Privacy Tones - Use this option to set the privacy code.
tC - Transmit Privacy Tone/Code - Use this option to set the transmitter
privacy code on repeater channels.
rC - Receive Privacy Tone/Code - Use this option to set the receiver
privacy code on repeater channels.
Pr - Transmit Power Level - Use this option to change the transmit power
level to High or Low.
Sq - Squelch Sensitivity - Use this option to adjust squelch sensitivity.
rb - Roger Beep - Use this option to set the option for the Roger Beep.
CA - Call Alert Tone - Use this option to select the Call Alert tone.
bP - Silent Operation - Use this option to set the option for the keypad
audible “beep” tones.
rP - Repeater Channels - Use this option to set the option for Repeater
channels.
db - Display Background - Use this option to select the color of the
display background.
Selecting a Privacy Code
Continuous Tone Coded Squelch System (CTCSS) and Digitally Coded
Squelch (DCS) are systems that allow several users to share the same
channel without disturbing each other. When CTCSS or DCS is enabled
for a selected channel, the channel is muted to all incoming signals unless
they carry the correct CTCSS or DCS tone.
Standard Channel Menu Quick Reference Chart
Re
peater Channel Menu Quick Reference Chart
To Next Page
Loading...
