Midland MXT275J - Repeater Channels; Selecting the LCD Display Background Color

Page 24
midlandusa.com
Model MXT275
Repeater Channels
Your MXT275 has the ability to access repeater channels. The use of a
repeater can signicantly increase a radio’s range and coverage area.
Prior to using a repeater you must coordinate with the owner of the
repeater to gain permission to use the repeater. Be sure to understand
and follow the sharing and usage rules for each repeater system.
To Set the Repeater Channel:
1. Press and release the Menu button to place the radio in “Menu” mode.
2. Use the Volume Up or Volume Down button to scroll through the menu
options until the LCD display shows r P.
3. Press the Lock button to conrm your selection.
4. Use the Volume Up or Volume Down button to select ON or OFF.
5. Press the Lock button to conrm your selection.
YOU MUST PRESS THE
LOCK BUTTON TO CONFIRM YOUR SELECTION OR THE REPEATER CHANNEL
SELECTION WILL NOT BE CHANGED.
▪ When activated the repeater channels will be displayed as the
channel number (Ex. 15,16,17,etc.) and the rP icon.
▪ Repeater channels will appear immediately following the standard
GMRS channels (ex: 20,21,22,15
r P,
16
rP
17
rP
etc).
Selecting the LCD Display Background Color
Your MXT275 has 7 different color options for the LCD Display
background.
To select the LCD Display background:
1. Press and release the Menu button to place the radio in “Menu” mode.
2. Use the Volume Up or Volume Down button to scroll through the menu
options until the LCD display shows db.
3. Press the Lock button to conrm your selection.
4. Use the Volume Up or Volume Down button to select the LCD Display
background color (oF - 07).