Midland PACIFIC - Roger Beep (End-Of-Message Tone); Dual Watch; Active Band; Private Channels: Programming And Selection

13
ENGLISH
6.4 Roger Beep (End-of-message tone):
WhenyoureleasethePTT,thatiseverytimeyouendtransmission,PACIFIC gives out a sound
indicatingtotheotherpartythats/hecanstarttalking.Thisfunctionisfactoryset.Todisablethe
function:
1)PresssixtimestheMENUbutton(exceptforCH75-76);‘rb on’willappearonthedisplay
2)Usingthe
/ buttonsselect‘oF’.
3) Press PTTbuttontoconrmorwaitfor10seconds.
Toreactivate thisfunctionrepeat theaboveprocedure.Alstep2usethe
/ buttonstoselect
‘on’.
6.5 DUAL WATCH
Thisfunctionallowsthemonitoringof2channelsofyourchoicebyselectingthechannelsinrapid
sequence.
Procedure:
1) Selectthechannelyouwanttomonitor.
2) PressseventimestheMENUbutton.‘of d’blinksonthedisplay.
3) Selectthesecondchanneltomonitor,bypushingthe / keys.
4) PushPTTtoactivatethefunction.
WhentheDualWatchisenabled,thedisplayshowsonlythetwomonitoredchannels.
Asfor theScan function,if youtransmitwhen theDual Watchis activated,the communication
remainsblockedonthatchannelforfurther10secondstoletyoulisteningtotheotherparty.Then,
itwillbeginscanningthetwochannelsagain.
Press MON/SCANtodisabletheDualWatch.
Theunitreturnstothechannelpreviouslyused.
6.6 Active band
ThePACIFICchannelselectioncanbechangedtofollowtherulesofUSA,CanadaorInternational
regulations.
INT(international)–usedinItalyandmostcountriesoftheworld
USA–usedintheUnitedStates
CAN – used in Canada
! USA and CAN Bands: for American area only.
! It is your own responsibility to choose the correct band (by means of the optional
programming kit PRG-PACIFIC), otherwise you may cause interferences with other
services or you may not be able to communicate.
6.7 Private channels: programming and selection
Onlyauthorizedcustomersareallowedtouseprivatechannels.Fordetailedinformationcontact
yourlocal radio communicationauthorities.To program the privatechannels,it is necessary to
connecttheoptionalprogrammingkitPRG-PACIFICoraskforinformationtoyourdealer.
Tosettheprogrammingmode,switchontheradiowhilekeepingpressedtheMENUbutton:the
displaywillshow‘Prog’.