Midland WR-100 Manual

Programming The Midland WR-100 NOAA All Hazards Radio
08-Mar-2008 Steele County SKYWARN Page 1 of 4
INSERT BATTERIES
1. Turn the Radio over.
2. Remove the cover for the battery
compartment by sliding it toward
the antenna.
3. Insert three (3) AA batteries.
4. Reinstall the cover for the battery
compartment.
5. The LCD display should indicate the time as 12:00 AM.
TURN RADIO ON
1. Slide the ON-OFF switch to the ON position - The “NOAA” icon appears.
SET CURRENT TIME
1. Press MENU - “TIME” appears in the display.
2. Press SELECT - The (wrong) time appears in the display.
3. Press the ▲button to set the correct hour, be sure to note the AM/PM indication.
4. Press ► to shift to setting the “tens” digit of the minutes.
5. Press the ▲button to set the “tens” digit.
6. Press ► to shift to setting the “ones” digit of the minutes.
7. Press the ▲button to set the “ones” digit.
8. Press MENU – “TIME” appears in the display.

Midland WR-100 Specifications

General

Type	Weather Radio
SAME Technology	Yes
Public Alert Certified	Yes
AM/FM Radio	No
Display	LCD
Channels	7 NOAA Channels
Brand	Midland
Model	WR-100
Frequency Range	162.400 - 162.550 MHz
Power Source	AC Adapter, Battery
Weight	1.0 lbs