What to do if Midland Weather Station is not responding to NWS weather alert broadcasts?
To ensure your Midland Weather Station responds correctly to NWS alerts, verify that you have programmed the correct FIPS codes into the radio's memory. Also, if you want to hear the alert or operate a device from the EXT.ALERT jack, make sure the display shows the SIREN or VOICE icon.
Why is there no weather broadcast when I press WEATHER on my Midland Weather Station?
If your Midland Weather Station isn't picking up a weather broadcast when you press the WEATHER button, try these steps: * Make sure the telescoping antenna is fully extended. * If you're using an external antenna, check that it's properly connected. * Confirm the radio is set to the NOAA weather channel used in your area. You might also want to contact NOAA to confirm they are currently broadcasting.
How to troubleshoot no power on Midland Weather Station?
To resolve a 'no power' issue with your Midland Weather Station, ensure the wall power adapter is connected to AC power, the cord to the radio is securely seated, and a fresh back-up battery is installed (if AC power has failed).
General| Brand | Midland |
|---|---|
| Model | WR-300 |
| Type | Weather Radio |
| Channels | 7 |
| Alerts | Yes |
| Display | LCD |
| Frequency Range | 162.400 - 162.550 MHz |
| S.A.M.E. Technology | Yes |
| Specific Area Message Encoding | Yes |
| Power Source | AC Adapter |
| Battery Type | AA |
| Backup Power | Battery |
| Alert Types | Tornado, Flood |
Guides users through powering the device, installing batteries, and setting up the antenna.
Provides instructions for configuring the time, date, and alarm features of the radio.
Explains how to select and tune into the appropriate NOAA weather channels for your area.
Explains the services and technologies behind weather alerts and SAME encoding.
Details what FIPS codes are, how to acquire them, and how to program them into the unit.
Covers programming, selecting alert reception modes (SINGLE, MULTIPLE, ALL), and reviewing stored codes.
Provides solutions for common problems like no power, no sound, or alert reception issues.
Lists detailed technical specifications for the general, receiver, and external alert output sections of the WR-300.
To Next Page
