20
Channel Frequency
(MHz)
1 162.400
2 162.425
3 162.450
4 162.475
5 162.500
6 162.525
7 162.550
When you have selected the correct frequency channel, press and
release the SELECT button to continue programming. Press and
release the MENU button to end programming.
NOTE: If no program keys are pressed for about one minute the
WR-300 will exit the menu mode.
Changing the Alert Pattern
The alert tone is a high low alternating sound. The speed of the
tones depends on if the WR-300 received a watch or warning.
The alert pattern has two options available through the program
button, VOICE and SIREN. If VOICE is chosen, the alert will
sound for about 8 seconds then the voice weather broadcast will
be heard for about 5 minutes when an alert message is received. If
you desire to listen to the broadcast longer, press the
“WEATHER/HAZARD” bar on the front the WR-300.
If SIREN is chosen, alert tones will sound for five minutes or
until the ALERT ON/OFF button is pressed. To change the
To Next Page
Loading...
