Midtronics MDX-600 Series

• 20 •
Changing The Printer Paper
The IR printer only uses thermal paper in a roll with the dimensions 2.25 in x 85
ft(57mmx25.9m).Youcanpurchasereplacementrollsatmostocesupply
stores.
To replace the paper roll:
1. Unlock the printer door by gently pressing on the red lever. Remove the
spent roll.
paper
compartment
release lever: press in this direction
paper
sensor
2. Place a new roll of paper in the compartment, and pull the paper forward
so that it extends past the serrated edge of the paper slot.
paper feeds from
underneath the roll
3. Closethedoorandmakesuretheleverlockssecurely.
www.midtronics.com