www.midtronics.com
6 – Error Codes
xRC-3363
27
E r ro r D e s c r ip t io n E r r o r C o d e E r ro r M e s s a g e
BECM Software
Version Error
27 Unable to Charge. Disconnect the charger, restore
vehicle harness connections and check BECM Soft-
ware Version and use Scan Tool to update PCM and
BECM as needed. Retry rescue charge after updating
PCM and BECM.
HV Relays Welded 28 Pack contactor error detected. Disconnect the
charger, restore vehicle harness connections, check
for BECM DTCs using a Scan Tool and diagnose as
necessary.
Pack Already Charged 29 The detected battery pack voltage indicates the
battery pack does not require charging.
BECM Failure Error 30 Loss of communication with BECM caused error to
occur during the Rescue Charge. Disconnect the
charger, restore vehicle harness connections, check
for BECM DTCs using a Scan Tool and diagnose as
necessary.
Internal Communication
Error
31 Internal Error. Contact Midtronics Customer Service.
To Next Page
Loading...
