SOUND SUBSYSTEM TEST
The Sound Subsystem Tests verify that the audio components are connected and operating properly.
Highlight the test by using any joystick to select the option; then press any control panel button to activate.
NOTE: The level must be turned up for speakers to be heard. Check the volume setting before testing.
SOUND SUBSYSTEM SUB MENU
Version, status, checksum, and RAM reports
are a series of diagnostic routines which analyze the
digital sound circuits. The results of the tests will be reported as numbers or messages; sounds may also
accompany some of the tests. Reports other than GOOD or OK may indicate a problem has been found.
The Sound Subsystem Tests are useful in locating digital circuit difficulties, especially when there is no
sound from the speakers with the volume set at high levels. These tests detect sound memory problems.
2-9
To Next Page