Miele B 2847 - Indicator Light Constant Lights Up; Steam Function Not Working

Problem Possiblecause Remedy
Theindicatorlight 2
lightsupconstantly.
Theemptyresidual
waterdrawerhasnot
beendetected.
Emptyanddrytheresidualwater
drawercompletely.Waitfor
approx.20secondsbefore
replacingthedrawer.
Cleananddrythemetal
contactsontheresidualwater
drawerandpushitbackintothe
appliance.
Iftheindicatorlightdoesnotgo
out,callMiele.
Thesteamfunction
ontheironorsteamer
isnotworking.
Thesteamironing
systemisnot
connectedtothe
electricitysupply.
Plugtheconnectioncableinto
themainselectricitysupply,
switchonatthewallandswitch
theapplianceonwiththeOn/Off
s button.
Neithertheironnor
thesteameris
pluggedin.
Connectthesteamhosetothe
steamconnectionsocketonthe
tower.
Thewatercontainer
isemptyornotfitted.
Fillthewatercontainerwithfresh
tapwater,pushitintothe
applianceandwaituntilthe
appliancesignalswiththe
indicatorlight * thatitisreadyto
usewithsteam.
Thesteamfunctionis
notreadyyet.
Wait until the indicator light *
comes on to signal that the steam
function is ready for use.
Afaulthasbeen
indicatedbyoneof
theindicatorlights.
Remedythefaultasexplainedin
thefollowingpages.
Ifthesteamfunctionisstillnot
working,callMiele.
Problemsolvingguide
65