Miele B 2847 - System Switches Off During Descaling; Indicator Light Constant On;Off Issues

Problem Possiblecause Remedy
Thesteamironing
systemswitchesoff
duringthedescaling
process.
Theironorthe
steamerwas
pluggedinduring
thedescaling
process.
Unplugtheironorthesteamer
fromthesteamconnection
socket.
Switchtheappliancebackon.
TheOn/Offindicator
light k lightsup
constantly.
Thewatercontainer,
oritscontents,was
notdetected.
Fillthewatercontainerwithfresh
tapwaterandpushitbackinto
theappliance.
Therinsingordescalingprocess
maystillbeactive.Waituntilthe
processhasfinished.
Thesettingofthewater
hardnesslevelhasnotbeen
completed.Ensurethis
procedurehasbeencompleted.
Iftheindicatorlightdoesnotgo
out,callMiele.
TheOn/Off k indicator
lightilluminatesduring
thedescalingprocess.
Thewatercontainer,
oritscontents,was
notdetected.
Pushthewatercontainerback
intotheappliance.
Fillthewatercontainerwithmore
waterandpushitbackintothe
appliance.
Iftheindicatorlightdoesnotgo
out,callMiele.
Theindicatorlight l
lightsupconstantly.
Thesteam
generatorhas
becometoohot.
Allowthesteamironingsystem
tocooldown.Aftertheindicator
light l hasgoneout,thesteam
ironingsystemisreadytouse
again.
Iftheindicatorlightdoesnotgo
out,callMiele.
Problemsolvingguide
64