Technical Information
8
B 890/B 990
The appliance is supplied with a power cord and NEMA 5-15 plug, ready for
connection to an AC single-phase 120V 60Hz supply. The fuse rating is 20
amps. The actual amperage draw from the appliance is 13 amps.
All electrical work should be carried out by a qualified electrician in
accordance with local and national safety regulations.
Do not connect the rotary iron to an extension cord. Extension cords do not
guarantee the required safety of the appliance (e.g., danger of overheating).
Important!
If it is necessary to change the rotary iron’s plug or power cord, please
take note of the following color codes of the wires:
Green/Yellow = Ground
Blue = Live 1
Brown = Live 2
Warning!
This appliance must be grounded.
To Next Page
Loading...
Need help?
General
