Technical Information
7
B 890/B 990
C Technical Data
Model B 890, B 990
Type Transportable folding unit for domestic use
External dimensions, operating
position
Height x width x depth: 37” x 39.4” x 16.4”
External dimensions, storage
(folded) position
Height x width x depth: 41.8” x 16.4” x 16.4”
Weight Approx. 84 lbs
Max. floor load in operation 84 lbs.
Casing Extruded aluminum, powder-coated
Heater plate
Material Extruded aluminum
Surface Hard anodized
Length
32.7”
Ironing surface area
145.7 square inches
Ironing pressure
74 lbs
Temperature control Temperature regulator 86 - 392°F
Heating time to 392°F
Approx. 2 min 45 sec
Roller
Length
32.7”
Diameter w/padding
6.3”
Roller base material
Galvanized sheet steel
Roller padding
Polyester needle felt
Roller cover
Cotton nettle cloth
Roller speed
5 steps, from 6 to 15 ft/min
Drive: Roller/Heater plate
Motor (M17, M18)
24VDC, 60W motors (on rollers with geared drive)
Power ratings
Heating
See data plate
Electrical connection 120VAC 60Hz (US models only)
Fuse rating 20A (US models only)
Current draw 13A (US models only)
Power cord
NEMA 5-15 plug (US models only)
Total rated load See data plate
Test certificates VDE with CCA, EMV
Table C-1: US Technical Data