Miele Built-in coffee machine - Spout Adjustment; Factory Default; Miele|Home, Remote Control and Supervision; Showroom Programme (Demo Mode)

The coffee machine is delivered with
the "Off" option for the plate warming
drawer setting is selected.
Spout adjustment
Please see "Spout adjustment
(CupSensor)" for details of this feature.
Factory default
You can reset the settings back to the
ones which were set when the coffee
machine was delivered - the factory
default settings and also delete
MyMiele entries.
Please refer to the "Possible setting
options" chart for the factory settings
which are shown in bold.
Please note that the following settings
will not be reset:
- Language
- Time
- Number of drinks (dispensed)
- Profiles
Miele|home, Remote control
and SuperVision
These options will only appear if the
coffee machine has been signed on to
the Miele|home system (see separate
Operating instructions).
Showroom programme (Demo
mode)
Do not activate this setting for
domestic use!
The coffee machine can be
demonstrated in the showroom using
the "Showroom programme". In this
mode the machine lights up but drinks
cannot be made or actions taken.
The coffee machine cannot be
switched off with the On/Off sensor K
when demo mode is activated.
Settings
52