Miele Built-in coffee machine User Manual

To reassemble the lid:
^
First insert the seal in the lid. If you
cannot insert it properly, try
moistening the seal with a little water.
^
Then insert the milk tube into the
seal.
Make sure that the slanted end of
the milk tube is facing downwards.
Otherwise the seal would be
damaged.
Step 2: Cleaning the air intake
tube and the angled connector
in the inside of the machine
front
Do not use a needle or similar
implement. This would damage the
components.
^
Open the service flap on the back of
the appliance door.
^
First release air intake tube a from
opening c. Then pull off angled
connector b.
^ Pull both tubes out of the angled
connector.
^ Use the cleaning brush supplied to
clean air intake tube a. "Blowing
through" can help to dislodge
blockages.
^ Clean the opening for air intake tube
c in the inside of the machine front.
^ Clean angled connector b under
running water. If necessary, replace
with the spare part supplied.
^
Insert the brush in milk tube d. Move
the brush back and forth as far as
possible until all milk deposits have
been removed.
Cleaning blockages from the milk pipework
83

Miele Built-in coffee machine Specifications

General

Brand	Miele
Frequency	50-60 Hz
Programmable	Yes
Automatic Shut-off	Yes
Removable Drip Tray	Yes
Adjustable Coffee Strength	Yes
Adjustable Cup Height	Yes
Maintenance Indicator	Yes
Descaling Function	Yes
Rinse Function	Yes
Energy Saving Mode	Yes
Child Lock	Yes
Appliance category	Built-in
Voltage	220-240 volts
Material	Stainless steel
Color	Stainless steel
Milk Frother	Yes
Warranty	2 years