Miele Built-in coffee machine User Manual

Tip: It is useful to have somewhere at
the height of the niche to place the
machine on. This makes electrical
connection and connection to the
plumbed in water supply easier.
^ Using the large allen key, unscrew all
four feet underneath the machine out
by approx. 2 mm.
The feet can be unscrewed by up to
approx. 10 mm.
^ Plumb the appliance into the mains
water supply (see "Plumbed in water
supply").
^
Connect the machine to the electrical
supply.
^
Push it all the way into the niche until
you feel resistance.
Take care not to damage the
electrical connection when pushing
the coffee machine into the niche.
^
Check the height of the machine to
make sure that it is sitting centrally in
the niche and that it is level. If this is
not the case, realign the machine
with using the four feet underneath.
Four M5 hexagon socket screws are
supplied for aligning and securing the
machine in its niche.
^
Open the front of the machine and
partially tighten the side socket
screws.
^ Carefully turn lower socket screws to
centre the machine in the niche.
^ Tighten both upper socket screws by
hand to secure the machine in the
unit. Do not overtighten them.
Installation
92

Miele Built-in coffee machine Specifications

General

Brand	Miele
Frequency	50-60 Hz
Programmable	Yes
Automatic Shut-off	Yes
Removable Drip Tray	Yes
Adjustable Coffee Strength	Yes
Adjustable Cup Height	Yes
Maintenance Indicator	Yes
Descaling Function	Yes
Rinse Function	Yes
Energy Saving Mode	Yes
Child Lock	Yes
Appliance category	Built-in
Voltage	220-240 volts
Material	Stainless steel
Color	Stainless steel
Milk Frother	Yes
Warranty	2 years