Problem solving guide
29
With the aid of the following guide, minor problems can be easily corrected
without contacting Miele.
If having followed the suggestions below, you still cannot resolve the problem,
please contact Miele (see end of this booklet for contact details).
Danger of injury. Installation, maintenance and repairs may only be carried
out by a suitably qualified and competent person.
Repairs and other work by unqualified persons could be dangerous. Miele can-
not be held liable for unauthorised work.
Do not attempt to open the casing of the CombiSet yourself.
Problem Cause and remedy
The cooking zones do
not heat up.
There is no power to the hob.
Check if the mains fuse has tripped. If it has, con-
tact a qualified electrician or Miele (minimum fuse
rating - see data plate).
There may be a technical fault.
Turn the cooking zone control to 0.
Disconnect the appliance from the electricity sup-
ply for approx. 1 minute. To do this:
– switch off at the isolator, or
– disconnect the mains fuse.
If, after resetting the trip switch in the mains fuse
box and switching the appliance back on, the ap-
pliance will still not heat up, contact a qualified
electrician or Miele.
A smell and vapours are
given off when the new
appliance is being used.
The metal components have a protective coating
which when heated for the first time will give off a
slight smell and possibly some vapours. The smell
and any vapours given off do not indicate a faulty
connection or appliance and they are not harmful to
health.
A cooking zone
switches off automatic-
ally.
The overheating protection mechanism has been ac-
tivated.
See "Overheating protection".
It is taking too long for
the contents of the pan
to come to the boil.
The appliance operates at a lower power level when
the control is positioned between the "12" and the
"0".
Check whether the mark on the control is pointing
to a position past the "12".
To Next Page
Loading...
Need help?
General
