Rinsing feature
The rinsing feature flushes out coffee
residue and pre-warms the coffee
system. When "Rinsing - On" is selected
the system will automatically be flushed
and pre-warmed when the appliance is
turned on. If this feature is set to
"Rinsing - Off" the system will only be
flushed and pre-warmed when the
rinse/pre-warm button is pressed.
^ Turn the program selector
counterclockwise to "Program mode."
^ Press the e button, to highlight
"RINSING" with an asterisk.
^ Press ENTER to select this
programming option.
The sub-menu will appear in the
message window.
^ Press button e, to turn the "Rinsing"
feature on or off.
^ Press ENTER to save this setting, or
turn the program selector to "0ff" to
cancel if a mistake has been made.
If "Rinsing on" is selected the unit will
automatically dispense water before
going into standby mode.
Programming
11
To Next Page
Loading...
