Hot water feature
When the feature "Programmed hot
water" is turned on, the machine will
dispense a precise, pre-programmed
quantity of hot water when the hot water
button d is pressed. When the feature
is turned off, the machine will dispense
hot water until the hot water button d
is pressed again. A max. amount of
9 oz. can be dispensed from the
machine.
^ Turn the program selector
counterclockwise to "Program mode".
^ Press the e button to highlight
"PROG. H. WATER" with an asterisk.
^ Press ENTER to select this option.
The sub-menu will appear in the
message window.
^ Press the e button to set the feature
on or off.
^ Press ENTER to save this setting, or
turn the program selector to "0ff" to
cancel if a mistake has been made.
Programming
17
To Next Page
Loading...
