Pre-brewing feature
When the pre-brewing feature is on, the
freshly ground coffee is moistened with
a little hot water to allow the aroma and
crema of the coffee to fully develop.
When the pre-brewing feature is off, the
hot water is forced through the coffee
immediately.
^ Turn the program selector
counterclockwise to "Program mode."
^ Press the e button to highlight
"PREBREWING" with an asterisk.
^ Press ENTER to select this option.
The sub-menu will appear in the
message window.
^ Press the e button to set the
pre-brewing process on, off or to
"long" (an extra long pre-brew).
^ Press ENTER to save this setting, or
turn the program selector to "0ff" to
cancel if a mistake has been made.
When making coffee with the
prebrewing feature on, "PREBREWING"
will appear in the message window
after the coffee has been ground.
Programming
15
To Next Page
Loading...
