^ Turn the steam selector clockwise to
the "o" position.
^ Press ENTER.
The display will read:
The machine needs to be rinsed to
clean out the descaling residue.
^ Fill the water tank three quarters of
the way with cold water and place it
back into the machine.
^ Place the empty 1 liter containers
below the hot water dispenser and
the steam nozzle and turn the steam
selector counterclockwise.
^ Allow the water to run through the
spout and nozzle completely.
When the water tank is empty, the
display will read.
^ Turn the steam selector clockwise to
position "o" and press ENTER.
^ If the program selector is on
"Program mode", the display will
read:
The unit is now descaled and ready for
use.
Descaling the appliance
46
To Next Page
Loading...
