What if the display shows the
alternating messages "RINSING
CYCLE" and "SELECT PRODUCT
READY FOR USE"?
This is a reminder to run the rinse cycle
before the next use.
To clear the message a rinse cycle
must be run.
^ Fill the water container with fresh tap
water.
^ Set a container (34 ounces [1 liter])
under the spouts.
^ Press the rinse button.
The display will read:
^ Press e, to select "Rinsing cycle" with
an asterisk.
^ Press ENTER.
The rinse cycle lasts about 5 minutes.
When complete, the coffee system is
ready to use.
Frequently asked questions
51
To Next Page
Loading...
