Miele CVA 7440 Operating And Installation Instructions

Cleaning and care
57
 Clean the area around the central
spout with a damp cloth.
Reassembling the central spout
The dispensing unit is easier to
reassemble if the individual parts are
dampened with water beforehand.
Make sure that all parts are tightly
connected to one another.
 Reassemble the dispensing unit.
Press down firmly so that the spouts
become securely connected to the
holder.
 Insert the dispensing unit into the
coffee machine and connect the milk
pipework.
 Refit the stainless steel cover.
 Close the appliance door.
Fit cover to main dispenser appears in the
display.
 Confirm the message withOK.
Cleaning the cup rim sensor
The cup rim sensor is located at the
bottom of the central spout.
Clean the cup rim sensor at least once
a week and more often if heavily soiled.
 Press the two retainers together (see
arrows).
The cup rim sensor is released.
 The cup rim sensor can be cleaned in
the dishwasher, or by hand using
warm water and a little dish
detergent.
 To refit the cup rim sensor, press it
into the holder on the central spout
from below.

Miele CVA 7440 Specifications

General

Product type	-
Built-in grinder	Yes
Capacity in cups	1 cups
Milk adding type	Automatic
Coffee input type	Coffee beans
Coffee maker type	Fully-auto
Milk tank capacity	0.7 L
Appliance placement	Built-in
Water tank capacity	2.7 L
Coffee beans capacity	300 g
Reservoir for brewed coffee	Cup
Cord length	2 m
Control type	Touch
Product color	White
Used capsules container capacity	17 pc(s)
Current	10 A
AC input voltage	220–240 V

Weight and Dimensions

Depth	475 mm
Width	595 mm
Height	455 mm
Installation compartment depth	500 mm
Installation compartment width	560 mm
Installation compartment height	448 mm