Miele CVA6401 - Milk valve maintenance

Cleaning and care
58
 Reassemble the dispensing unit in
the r
everse order. Make sure that up‐
per adapter  clicks into position.
Press the dispenser nozzles  firmly
onto the dispensing unit.
 Replace the dispensing unit in the
main
dispenser.
 P
ut the cover back into place.
Maintenance of the milk valve
The milk valve should be cleaned once
a week t
o ensure good quality milk
froth.
 Tap .
 W
ith the arrow key , select Mainte-
nance. Then tap
OK.
 Select Condition milk valve and tap OK.
The milk valve will move into the main‐
t
enance position.
Important! Before confirming Leave
maintenance position with OK, you
must remove the cleaning brush.
Otherwise the coffee system will be
damaged.
 Inser
t the brush in the milk valve and
move it back and forth.
 T
ap
OK.
The milk valve will move into the correct
position and the milk pipework will be
rinsed thr
ough.